How to apply window cling

Wet Method (preferred):

Clean the surface thoroughly with soap and water.  Rinse the surface with water and leave the surface wet.  Remove the static cling from the thick paper and place the front of the CSA logo against the application surface. If the material placement is incorrect, pick up the entire cling and reposition. Do not attempt to slide the cling. While carefully laying the cling against the surface, from one end to the other, use the pads of your fingers to push out any air bubbles.  If air bubbles are present after the cling has been applied, remove cling and start over again.  After the cling has been applied, gently use a cloth to remove excess water.

Dry Method:

Clean the surface thoroughly with soap and water, or glass cleaner, before applying the window cling. Dry the surface with a towel.  Remove the static cling from the thick paper and place the front of the CSA logo against the application surface. If the material placement is incorrect, pick up the entire cling and reposition. Do not attempt to slide the cling. While carefully laying the cling against the surface, from one end to the other, use the pads of your fingers to push out any air bubbles.  If air bubbles are present after the cling has been applied, remove cling and start over again.   

 

CSA window cling

 

IN STOCK

$2.25 / 1 pc.

  pc.  

 

 

The Czech Small Arms window cling is ideal for those who want to avoid the permanent issues associated with a sticker (measures 3.5 inch x 5.0 inch). 

The cling easily adheres to glass or clear plastic and is mounted from the inside - not exposed to the elements of weather.  The photo shows the CSA window cling mounted to the inside section of a 3/8 inch sheet of plexiglass.

Excellet for gun store windows, glass cabinets, or the rear windows of automobiles.  

 
 

© 2013 NOWONET media, s.r.o.