Technical Specifications

Caliber 7.62 x 39 mm
Muzzle velocity 2,198 to 2,296 feet per sec.
Effective range - against individual targets up to 655 yds
Effective range - against group targets up to 875 yds
Maximum range 3,060 yds
Practical rate of fire 40 shots/min.
Rifle weight without magazine 6.67 lbs
Weight of an empty magazine 0.42 lbs
Weight of a full magazine 1.50 lbs

Rifle length (stock extended)

33.90 in

Rifle length (stock folded)

25.75 in
Rifle width 2.32 in
Rifle height without magazine 6.78 in
Rifle height with magazine 9.96 in
Barrel length (includes muzzle brake) 16.25 in
Number of grooves in the barrel 4
Length of the rifling 9.45 in
Trigger pull 5.51 - 5.95 lbs (24.5 - 26.5 N)
Click on the photo for Sa vz. 58 development history: 

vz. 58 762 CQB - Folder



$1,375.00 / 1 pc.




Highlights of the Sa vz. 58 CQB 762 model: 

- shortest vz. 58 barrel length (with Phantom flash hider) that is NOT an SBR (Short Barreled Rifle)!
- bayonet lug is attached and will accept vz. 58 surplus bipods, but not surplus bayonets as the barrel is too short for bayonet clearance
- flash hider permanently attached by blind pinned method
- chrome lined 14.25 inch barrel is new manufacture by Lothar Walther in Germany
- this is a Czech Small Arms factory CQB barrel length (not modified from a 16 inch barrel)
- flat black finish cured at 300 degrees Fahrenheit
- Original military issue vz. 58 side folding stock.  Stock assembly has been refurbished to minimize movement in extended position.  
- patented push-down plate on bolt carrier to prevent misfire issues (D-Technik/Czech Small Arms vz. 58 firearms are the only vz. 58s manufactured with this vital part to ensure reliability)
- two 30 round magazines (if you are located in a magazine restricted state, a 10 round magazine and 3 stripper clips will be sent in place of the two 30 round magazines)
- CD containing manual and historical information
- cleaning kit (does not include oil can)
- new production black color sling
- 5 year warranty

CQB model information: 

*  CQB is an abbreviation for 'Close Quarters Battle.'  The Czech Small Arms factory CQB rifle model is an ideal rifle for training and operating in confined areas.   Its compact size with both barrel length (including flash hider) and overall length make this rifle an excellent choice when a non-NFA firearm is needed.  Barrel length, not including permanently attached flash hider, is 14.25 inches (with permanently attached flash hider, barrel length is 16.25 inches).   Overall rifle length of the CQB model with stock collapsed is 25.75 inches.

* All CQB models going forward will possess the Phantom flash hider and not the muzzle brake.  Reasons:  the Phantom flash hider has the advantage of tightening against the muzzle whereas the muzzle brake tightens against the front sight base.  Tightening against the muzzle allows the flash hider to remain tight and results in less point of impact bullet shift compared to the muzzle brake.  In addition, the flash hider is much more effective at reducing muzzle flash on the shorter barrel than the muzzle brake.  Lastly, the flash hider results in less noise than the muzzle brake for both the shooter and others on the firing line.  The advantages found with Phantom flash hider make it ideal for the CQB model!


Steel Trigger

The vz. 58 includes the glass-filled nylon US made trigger.   If the Czech steel trigger is preferred, please scroll down to the bottom of the page to purchase the steel trigger installed and it will be installed before your vz. 58 ships.

Left-side Charging Handle Bolt Carrier

As shown in the photos, the bolt carrier that is standard for this vz. 58 model is the right-side charging handle bolt carrier.  If the left-side charging handle bolt carrier is preferred, please scroll down to the bottom of the page to purchase this part 'INSTALLED' and your vz. 58 will ship with the left-side charging handle bolt carrier. 

As found throughout the Czech Small Arms (CSA) line of vz.58 rifles and pistols, the vz.58 CQB 762 possesses the patented 'push-down' plate on the bolt carrier. The patented ‘push-down’ plate ensures the user will not experience possible misfire problems that can be found with other manufacturer vz.58 type firearms.

The vz.58 Sporter was imported into the United States in compliance with 18 U.S.C. 925(d)(3). CzechPoint adds USA made parts to the vz. 58 Sporter so as to legally reconfigure the firearm with a separate pistol grip and stock. This means that all vz. 58 rifles capable of using double stack magazines possess 5 USA made parts to fully comply with Title 18, U.S.C., Section 922(r).  

This rifle model includes seven USA made parts (only five US made parts are required for 922r compliance so this rifle model possesses two extra US made parts).   The seven USA made parts are: trigger (glass-filled nylon), handguard, grip, polymer follower, polymer floor plate, buttstock, and flash hider.  If the Czech steel trigger is preferred, please scroll down to the bottom of the page to purchase the steel trigger installed and it will be installed before your rifle ships.  If the Czech steel trigger is installed, the rifle still meets 922r compliance with the remaining six USA made parts.

The Czech Small Arms stock adapter mounts the M4 style stock tube at the bottom area of the vz.58 receiver and has a slight downward angle (as can been seen in the photos to the left). Even though this adapter mounts the M4 style stock slightly higher than the original vz.58 wood impregnated stock, it still provides a comfortable cheek weld for iron sights.

The color of the finish is a semi gloss/matte black coating (cured at 300°F).   The new production rifle barrels are manufactured by Lothar Walther in Germany and made from a high alloy Chrome Molybdenum steel (4340) and is chrome-lined.  

Important Notes:  

Please note that we are unable to fill requests for a specific trigger guard, front sight base, or sling swivel.  Over the years, different trigger guards and sling swivels were manufactured as well as two different front sight bases (enclosed circle or ears protecting the front sight post).  One is not better than the other - they are just slightly different.


Related products

steel trigger installed
ITEM # vz58-4I


Notify me when in stock
receiver side rail
ITEM # vz58-029


Notify me when in stock
NITRIDE - receiver side rail
ITEM # vz58-029NI


Notify me when in stock
LPM optic mount
ITEM # vz58-292LR


Notify me when in stock
ISC Riser optic mount
ITEM # vz58-292R


vz. 58 30 round blem magazine
ITEM # vz58-6BLEM


Notify me when in stock

© 2013 NOWONET media, s.r.o.