Caliber 5.56 x 45 mm (.223 Rem)
Muzzle velocity 2,214 - 2,247 feet per sec.
Number of grooves in barrel 4
Twist of rifling 1 in 7 inches
Overall length of pistol (arm brace collapsed)  25.40 in
Overall length of pistol (arm brace fully extended)
 28.80 in
Barrel length (measured from muzzle to bolt face)  7.62 in
Length of sight line  6.10 in
Rear sight gradient
100m to 500m
Width of pistol 2.32 in
Height of pistol with magazine 9.45 in
Practical rate of fire 40 shots/min
Maximum range of fire 1,100 m
Lethal range of projectile 1,100 m
Weight of pistol without magazine 5.73 lbs
Weight of pistol with loaded magazine 6.85 lbs
Weight of empty magazine 0.33 lbs
Weight of full magazine 1.12 lbs
Trigger pull 5.51lbs to 5.95lbs (24.5-26.5N)

Click on the photo for Sa vz. 58 development history: 


vz. 58 Compact 556B

 

OUT OF STOCK

$1,225.00 / 1 pc.

 

 

The Sa vz.58 pistol in 5.56x45 is manufactured by Czech Small Arms in Jablunka, Czech Republic and includes the following: 

- high quality barrel manufactured by Lothar Walther in Germany
- chrome lined barrel bore
- Shockwave Blade pistol stabilizer
- Phantom flash hider
- patented push-down plate on bolt carrier to prevent misfire issues (Czech Small Arms vz. 58 firearms are the only vz. 58s manufactured with this vital part to ensure reliability)
- drilled and tapped side rail holes in receiver for do-it-yourself side rail installation for optic mounts (side rail and optic mount not included with pistol)
- semi gloss/matte black finish cured at 300 °F over phosphate.
- two 30 round magazines (will include clear and/or black magazine)
- owner's manual
- cleaning kit
- sling
- 5 year warranty

IMPORTANT NOTES:

Steel Trigger

Pistol includes the glass-filled nylon US made trigger.   If the Czech steel trigger is preferred, please scroll down to the bottom of the page to purchase the steel trigger installed and it will be installed before your pistol ships.  To confirm, US made 922(r) parts are not applicable to pistols.  922(r) is only applicable to rifles. 

Left-side Charging Handle Bolt Carrier

As shown in the photos, the bolt carrier that is standard for this vz. 58 model is the right-side charging handle bolt carrier. If the left-side charging handle bolt carrier is preferred, please scroll down to the bottom of the page to purchase this part 'INSTALLED' and your vz. 58 will ship with the left-side charging handle bolt carrier.

Important Notes:  The bayonet lug is not attached to the front sight base.  Reason:  it is not possible to fix a bayonet to the vz.58 pistol as the proximity of the bayonet lug to the gas adapter/block does not permit attachment.  In addition, all vz. 58 Compact 556 pistols possess the front sight base with enclosed circle and the narrow width trigger guard (as shown in the photos). In addition, front and rear sling swivels are identical to what is shown in the photos too.

Gas Piston Notes: The Compact pistol gas piston cannot be removed without a tool. To remove the gas piston, once the upper handguard jacket has been removed, use a cleaning rod section from the cleaning kit and insert the cleaning rod into the receiver (beneath the rear sight). Push the gas piston to the rear with the cleaning rod to compress the gas piston spring and then push down on the rear of the piston that is protruding from the gas piston hole in the receiver. This action will angle the gas piston upwards, away from the gas adapter/block, and the piston can now be removed using index finger and thumb.

Shockwave Blade pistol stablizer Notes:  The Blade stabilizer is made from high strength glass-reinforced polymer and is attached to the pistol using the Czech Small Arms adapter.  The Blade incorporates a vertical “fin,” which you stabilize against the inside of your forearm when in the firing position. Or, you can stabilize the Blade against your cheek for a perfect, steady sight picture.  The Blade is secured to the tube using the set screw.   Each vz. 58 Compact pistol will include a copy of an ATF approval letter detailing the Shockwave Blade pistol stabilizer.

Pistol includes the glass-filled nylon US made trigger. If the Czech steel trigger is preferred, please scroll down to the bottom of the page to purchase the steel trigger and it will be installed before your pistol ships.  Section 922(r) is not applicable to the vz. 58 Compact model as it is a pistol and not a rifle.  The color of the finish is a semi gloss/matte black coating (cured at 300°F).   The new production pistol barrel is made from a high alloy Chrome Molybdenum steel (4340) and IS chrome-lined.   The flash hider is removeable and the thread pattern is 14x1 right hand (standard vz.58 thread pattern). 

SBR Warning: a stock can only be legally attached to this pistol after a Form 1 has been approved by BATFE.   Attaching a stock to the vz.58 pistol, without an approved Form 1, is a federal felony and conviction could result in 10 years imprisonment and a $250,000 fine.

Drilled and tapped holes for the receiver side rail ARE included in the purchase price of the pistol.   In other words, you can easily install our optional side rail by removing the two screws in the receiver and screw on the side rail with a hex/Allen wrench.   GUNSMITHING IS NOT REQUIRED TO ATTACH THE SIDE RAIL TO OUR VZ.58 PISTOL.   Do not forget to use high strength thread-locker on the screws while attaching the side rail.

 
 

Related products

 
steel trigger installed
ITEM # vz58-4I
OUT OF STOCK

$99.00

Notify me when in stock
receiver side rail
ITEM # vz58-029
OUT OF STOCK

$49.00

Notify me when in stock
LPM optic mount
ITEM # vz58-292LR
OUT OF STOCK

$84.00

Notify me when in stock
ISC Riser optic mount
ITEM # vz58-292R
IN STOCK

$67.00

5.56 Black 2nd Gen Magazine 30 round
ITEM # vz58-2-006HB30
IN STOCK

$25.00

5.56 Matte 2nd Gen Magazine 30 round
ITEM # vz58-2-006HC30
IN STOCK

$25.00

5.56 Matte 2nd Gen Magazine 10 round
ITEM # vz58-2-006HC10
IN STOCK

$32.50

5.56 Matte 2nd Gen Magazine 5 round
ITEM # vz58-2-006HC5
IN STOCK

$32.50

 

© 2013 NOWONET media, s.r.o.