Caliber 7.62 x 39mm
Muzzle velocity 2,198 - 2,296 feet per sec.
Number of grooves in barrel 4
Twist of rifling 1 in 9.45 inches
Overall length of pistol
29.94 in
Barrel length (measured from muzzle to bolt face) 11.90 in
Length of sight line 10.43 in
Rear sight gradient
100m to 800m
Width of pistol 2.32 in
Height of pistol with magazine 9.96 in
Practical rate of fire 40 shots/min
Maximum range of fire 2,500 m
Lethal range of projectile 2,500 m
Weight of pistol without magazine 6.86 lbs
Weight of pistol with loaded magazine 8.36 lbs
Weight of empty magazine 0.42 lbs
Weight of full magazine 1.50 lbs
Trigger pull 5.51lbs to 5.95lbs (24.5-26.5N)
Click on the photo for Sa vz. 58 development history: 


vz. 58 Pistol 762B

 

OUT OF STOCK

$1,225.00 / 1 pc.

 

 

The Sa vz.58 pistol in 7.62x39 is manufactured by Czech Small Arms in Jablunka, Czech Republic and includes the following: 

- high quality barrel manufactured by Lothar Walther in Germany
- chrome-lined barrel bore
- Shockwave Blade pistol stabilizer
- Phantom flash hider
- patented push-down plate on bolt carrier to prevent misfire issues (Czech Small Arms vz. 58 firearms are the only vz. 58s manufactured with this vital part to ensure reliability)
- drilled and tapped side rail holes in receiver for do-it-yourself side rail installation for optic mounts (side rail and optic mount not included with pistol)
- semi gloss/matte black finish cured at 300 °F over phosphate.
- two 30 round aluminum magazines
- owner's manual
- cleaning kit
- sling
- 5 year warranty

IMPORTANT NOTES:

Steel Trigger

Pistol includes the glass-filled nylon US made trigger.   If the Czech steel trigger is preferred, please scroll down to the bottom of the page to purchase the steel trigger installed and it will be installed before your pistol ships.  To confirm, US made 922(r) parts are not applicable to pistols.  922(r) is only applicable to rifles. 

Left-side Charging Handle Bolt Carrier

As shown in the photos, the bolt carrier that is standard for this vz. 58 model is the right-side charging handle bolt carrier. If the left-side charging handle bolt carrier is preferred, please scroll down to the bottom of the page to purchase this part 'INSTALLED' and your vz. 58 will ship with the left-side charging handle bolt carrier.

Additional Notes:  The bayonet lug is not attached to front sight.  Reason:  it is not possible to fix a bayonet to the vz.58 pistol as the proximity of the bayonet lug to the gas adapter/block does not permit attachment.  In addition, CzechPoint is unable to fill requests for the type of front sling swivel, front sight base, and/or trigger guard.

Pistol includes the glass-filled nylon US made trigger. If the Czech steel trigger is preferred, please scroll down to the bottom of the page to purchase the steel trigger and it will be installed before your pistol ships. Section 922(r) is not applicable to the vz. 58 pistol model as it is a pistol and not a rifle.  The color of the finish is a matte black coating (cured at 300°F).   The new production pistol barrel is made from a high alloy Chrome Molybdenum steel (4340) and IS chrome-lined.   The muzzle nut is removeable and the thread pattern is 14x1 right hand (standard vz.58 thread pattern). 

The Sa vz. 58 pistol was imported by CzechPoint into the USA with the CSA rear sling swivel and sling swivel plate.  CzechPoint removed the sling swivel screw and plate and attached the CSA AR15/M4 adapter to mount the Shockwave Blade brace.  

Drilled and tapped holes for the receiver side rail ARE included in the purchase price of the pistol. In other words, you can easily install our optional side rail by removing the two screws in the receiver and screw on the side rail with a hex/Allen wrench. GUNSMITHING IS NOT REQUIRED TO ATTACH THE SIDE RAIL TO OUR VZ.58 PISTOL. Do not forget to use high strength thread-locker on the screws while attaching the side rail. To purchase the side rail, please scroll down the page for product information.

 

Download Manual

Sa vz. 58 Pistol Instruction ManualSa vz. 58 Pistol Instruction Manual
 
 

Related products

 
steel trigger installed
ITEM # vz58-4I
OUT OF STOCK

$99.00

Notify me when in stock
receiver side rail
ITEM # vz58-029
OUT OF STOCK

$49.00

Notify me when in stock
LPM optic mount
ITEM # vz58-292LR
OUT OF STOCK

$84.00

Notify me when in stock
ISC Riser optic mount
ITEM # vz58-292R
IN STOCK

$67.00

 

© 2013 NOWONET media, s.r.o.