Caliber 7.62 x 39 mm
Muzzle velocity 2,198 to 2,296 feet per sec.
Effective range - against individual targets up to 655 yds
Effective range - against group targets up to 875 yds
Maximum range 3,060 yds
Practical rate of fire 40 shots/min.
Rifle weight without magazine 7.77 lbs
Weight of an empty magazine 0.21 lbs
Weight of a full magazine 0.57 lbs
Rifle length with stock extended 38.20 in
Rifle length with stock collapsed
34.90 in
Rifle width 2.32 in
Rifle height without magazine 6.85 in
Rifle height with magazine 9.96 in
Barrel length
16.15 in
Number of grooves in the barrel 4
Length of the rifling 9.45 in
Trigger pull 5.51 - 5.95 lbs (24.5 - 26.5 N)
Click on the photo for Sa vz. 58 development history: 


vz. 58 Tactical 762 Elite - FDE

 

OUT OF STOCK

$1,445.00 / 1 pc.

 

 

*** LIMITED SUPPLY AVAILABLE ***

*** LAST TIME THIS MODEL WAS AVAILABLE FOR SALE WAS JANUARY ***

*** WHEN MODEL IS SOLD OUT, NEXT AVAILABLE TIMEFRAME WILL BE FALL 2017 ***

The Sa vz.58 in 7.62x39 is manufactured by Czech Small Arms in Jablunka, Czech Republic and includes the following:  

- chrome lined 16.15 inch barrel with removable flash hider
- high quality barrel manufactured by Lothar Walther in Germany

- Magpul CTR FDE buttstock with Mil-Spec extension tube
- Magpul Zhukov FDE lower handguard (Handguard modifed to fit vz. 58.   NO MODIFICATION OF VZ. 58 REQUIRED WHATSOEVER TO ACCEPT THE ZHUKOV HANDGUARD!)
- US made black pistol grip and black upper handguard
- left side charging handle on bolt carrier
- lightweight skeleton side rail rail (2.6 ounces)
- Phantom flash hider (utilizing original vz. 58 thread pitch of 14x1 right hand)
- patented push-down plate on bolt carrier to prevent misfire issues (Czech Small Arms vz. 58 firearms are the only vz. 58s manufactured with this vital part to ensure reliability)
- side rail installed, with permanent threadlocker, for use with optic mounts (optic mount not included)
- semi gloss/matte black finish cured at 300 °F over phosphate
- two 30 round magazines
- owner's manual
- cleaning kit (does not include oil can)
- 5 year warranty

IMPORTANT NOTE:

Rifle includes the glass-filled nylon US made trigger.   If the Czech steel trigger is preferred, please scroll down to the bottom of the page to purchase the steel trigger installed and it will be installed before your rifle ships.

CzechPoint is excited to offer the Elite series of vz. 58 rifles.  Each vz. 58 Elite model will possess Magpul CTR buttstock, Magpul Zhukov lower handguard, lightweight skeleton side rail, left-hand side charging handle on bolt carrier, and Phantom flash hider. Due to the wide variety of sling and sling swivel options, we chose to leave those items off the rifle so you can personalize it to your specifications.   All parts mentioned are being used to build Elite model rifles so we do not currently have any of these parts available to sell separately.  CzechPoint will sell these parts separately in the future, but we do not have a specific time frame.  An absolute guess on time frame will be approximately late spring (could be sooner, could be later). 

As found throughout the Czech Small Arms (CSA) line of vz.58 rifles and pistols, the vz.58 Elite series of rifles possess the patented 'push-down' plate on the bolt carrier. The patented ‘push-down’ plate ensures the user will not experience possible misfire problems that can be found with other manufacturer vz.58 type firearms.

The vz.58 Sporter is imported into the United States in compliance with 18 U.S.C. 925(d)(3). CzechPoint adds USA made parts to the vz. 58 Sporter so as to legally reconfigure the firearm with a separate pistol grip and stock. This means that all vz. 58 rifles capable of using double stack magazines possess 5 USA made parts to fully comply with Title 18, U.S.C., Section 922(r).  The vz. 58 rifle is not sold with the bayonet lug as importation of the vz. 58 with a bayonet lug would violate US import law.

This rifle model includes seven USA made parts (only five US made parts are required for 922r compliance so this rifle model possesses two extra US made parts).   The seven USA made parts are: trigger (glass-filled nylon), handguard, grip, polymer follower, polymer floor plate, buttstock, and removable flash hider.  If the Czech steel trigger is preferred, please scroll down to the bottom of the page to purchase the steel trigger installed and it will be installed before your rifle ships.  If the Czech steel trigger is installed, the rifle still meets 922r compliance with the remaining six USA made parts.

The Czech Small Arms stock adapter mounts the stock extension tube at the bottom area of the vz.58 receiver and has a slight downward angle (as can been seen in the photos to the left). Even though this adapter mounts the Magpul CTR stock slightly higher than the original vz.58 wood impregnated stock, it still provides a comfortable cheek weld for iron sights.

The color of the finish is a semi gloss/matte black coating (cured at 300°F).   The coating has been applied over a phosphate finish to maximize finish durability.   The new production rifle barrels are manufactured by Lothar Walther in Germany and made from a high alloy Chrome Molybdenum steel (4340) and is chrome-lined.   The muzzle brake is removable and the thread pattern is 14x1 right hand (standard vz.58 thread pattern). 

Important Notes:  We are unable to fill requests for a specific sling swivel or trigger guard.  

 
 

Related products

 
steel trigger installed
ITEM # vz58-4I
IN STOCK

$99.00

LPM optic mount
ITEM # vz58-292LR
IN STOCK

$84.00

 

© 2013 NOWONET media, s.r.o.