For details on magazine block and function, please click on video below

Caliber 5.56 x 45 mm (.223 Rem)
Muzzle velocity 2,920 to 2,986 feet per sec.
Number of grooves in barrel 4
Twist of the rifling 1 in 7 inches
Overall length of rifle with stock extended 38.30 in
Overall length of rifle with stock collapsed 35.00 in
Barrel length 16.15 in
Length of sight line 14.76 in
Rear sight gradient
from 100 to 800 by 100 m
Width of rifle 2.32 in
Height of rifle with magazine 6.85 in
Practical rate of fire 40 shots/min.
Maximum range of fire 2, 000 yds
Lethal effect of projectile up to 1, 500 yds
Weight of rifle without magazine 7.82 lbs
Weight of empty magazine 0.21 lbs
Weight of full magazine 0.47 lbs
Trigger pull 5.51 - 5.95 lbs (24.5 – 26.5 N)
Click on the photo for Sa vz. 58 development history: 

vz.58 Liberty 556CSM



$1,265.00 / 1 pc.



The Liberty models are designed and manufactured by Czech Small Arms specifically for states with laws restricting detachable magazine rifles.  Offered for sale to New York, Connecticut, and California.  

The Sa vz.58 in 5.56x45 is manufactured by Czech Small Arms in Jablunka, Czech Republic and includes the following: 

- magazine block installed making for a non-readily detachable magazine
- in the event the rifle owner relocates to a state without magazine restrictions, the magazine block can be swapped out for the standard magazine catch/release
- chrome lined 16.15 inch barrel with removable muzzle brake
- high quality barrel manufactured by Lothar Walther in Germany
- patented push-down plate on bolt carrier to prevent misfire issues (Czech Small Arms vz. 58 firearms are the only vz. 58s manufactured with this vital part to ensure reliability)
- side rail installed, with permanent threadlocker, for optic mounts (optic mount not included).
- semi gloss/matte black finish cured at 300 °F over phosphate
- TactLite six position collapsible stock utilizing Mil-Spec extension tube with new production polymer injected pistol grip and upper and lower handguard
- 10 round polycarbonate waffle-type pattern magazine attached to rifle with magazine block
- owner's manual
- cleaning kit (does not include oil can)
- sling
- 5 year warranty


Steel Trigger

The vz. 58 includes the glass-filled nylon US made trigger.   If the Czech steel trigger is preferred, please scroll down to the bottom of the page to purchase the steel trigger installed and it will be installed before your vz. 58 ships.

Left-side Charging Handle Bolt Carrier

As shown in the photos, the bolt carrier that is standard for this vz. 58 model is the right-side charging handle bolt carrier.  If the left-side charging handle bolt carrier is preferred, please scroll down to the bottom of the page to purchase this part 'INSTALLED' and your vz. 58 will ship with the left-side charging handle bolt carrier. 


As found throughout the Czech Small Arms (CSA) line of vz.58 rifles and pistols, the vz.58 Liberty models possess the patented 'push-down' plate on the bolt carrier. The patented ‘push-down’ plate ensures the user will not experience possible misfire problems that can be found with other manufacturer vz.58 type firearms.

The vz.58 Sporter was imported into the United States in compliance with 18 U.S.C. 925(d)(3). CzechPoint adds USA made parts to the vz. 58 Sporter so as to legally reconfigure the firearm with a separate pistol grip and stock. This means that all vz. 58 rifles capable of using double stack magazines possess 5 USA made parts to fully comply with Title 18, U.S.C., Section 922(r).  The vz. 58 rifle is not sold with the bayonet lug as importation of the vz. 58 with a bayonet lug would violate US import law.  

This rifle model includes seven USA made parts (only five US made parts are required for 922r compliance so this rifle model possesses two extra US made parts). The seven USA made parts are: trigger (glass-filled nylon), handguard, grip, polymer follower, polymer floor plate, buttstock, and removable muzzle brake. If the Czech steel trigger is preferred, please scroll down to the bottom of the page to purchase the steel trigger installed and it will be installed before your rifle ships. If the Czech steel trigger is installed, the rifle still meets 922r compliance with the remaining six USA made parts. .  The M4 stock is the TactLite six position stock with a Mil-Spec extension tube. This is not the commercial model stock assembly.

The Czech Small Arms stock adapter mounts the M4 style stock tube at the bottom area of the vz.58 receiver and has a slight downward angle (as can been seen in the photos to the left). Even though this adapter mounts the M4 style stock slightly higher than the original vz.58 wood impregnated stock, it still provides a comfortable cheek weld for iron sights.

The color of the finish is a semi gloss/matte black coating (cured at 300°F).   The coating has been applied over a phosphate finish to maximize finish durability.   The new production rifle barrels are manufactured by Lothar Walther in Germany and made from a high alloy Chrome Molybdenum steel (4340) and is chrome-lined.   The muzzle brake is removable and the thread pattern is 14x1 right hand (standard vz.58 thread pattern). 

Important Notes: 

We are unable to fill requests for a specific sling swivel. The sling swivel will be one of two types:  flat t-shape or circle. 

Stripper clips are not included as 5.56x45 Liberty model rifles do not use stripper clips. 



Download Manual

Sa va. 58 Instruction ManualSa va. 58 Instruction Manual

Related products

steel trigger installed
ITEM # vz58-4I


Notify me when in stock
LPM optic mount
ITEM # vz58-292LR


Notify me when in stock
ISC Riser optic mount
ITEM # vz58-292R



© 2013 NOWONET media, s.r.o.