vz. 58 stripper clip loading

For details on magazine block and function, please click on video below

Caliber 7.62 x 39 mm
Muzzle velocity 2,198 to 2,296 feet per sec.
Effective range - against individual targets up to 655 yds
Effective range - against group targets up to 875 yds
Maximum range 3,060 yds
Practical rate of fire 40 shots/min.
Rifle weight without magazine 7.78 lbs
Weight of an empty magazine 0.21 lbs
Weight of a full magazine 0.57 lbs
Rifle length with stock extended 38.20 in
Rifle length with stock collapsed
34.90 in
Rifle width 2.32 in
Rifle height without magazine 6.85 in
Rifle height with magazine 6.85 in
Barrel length
16.15 in
Number of grooves in the barrel 4
Length of the rifling 9.45 in
Trigger pull 5.51 - 5.95 lbs (24.5 - 26.5 N)
Click on the photo for Sa vz. 58 development history: 


vz.58 Liberty 762CSM

 

IN STOCK

$1,265.00 / 1 pc.

  pc.  

 

 

The Liberty models are designed and manufactured by Czech Small Arms specifically for states with laws restricting detachable magazine rifles.  Offered for sale to New York, Connecticut, and California. 

The Sa vz.58 in 7.62x39 is manufactured by Czech Small Arms in Jablunka, Czech Republic and includes the following:  

- magazine block installed making for a non-readily detachable magazine
- in the event the rifle owner relocates to a state without magazine restrictions, the magazine block can be swapped out for the standard magazine catch/release
- chrome lined 16.15 inch barrel with removable muzzle brake
- high quality barrel manufactured by Lothar Walther in Germany
- patented push-down plate on bolt carrier to prevent misfire issues (Czech Small Arms vz. 58 firearms are the only vz. 58s manufactured with this vital part to ensure reliability)
- side rail installed, with permanent threadlocker, for use with optic mounts (optic mount not included)
- semi gloss/matte black finish cured at 300 °F over phosphate
- TactLite six position collapsible stock utilizing Mil-Spec extension tube with new production polymer injected pistol grip and upper and lower handguard
- one 10 round magazine attached to rifle with magazine block
- three stripper clips
- owner's manual
- cleaning kit (does not include oil can)
- sling
- 5 year warranty

Important Notes:

Steel Trigger

Rifle includes the glass-filled nylon US made trigger.   If the Czech steel trigger is preferred, please scroll down to the bottom of the page to purchase the steel trigger installed and it will be installed before your rifle ships.

Left-side Charging Handle Bolt Carrier

As shown in the photos, the bolt carrier that is standard for this vz. 58 model is the right-side charging handle bolt carrier. If the left-side charging handle bolt carrier is preferred, please scroll down to the bottom of the page to purchase this part 'INSTALLED' and your vz. 58 will ship with the left-side charging handle bolt carrier.

Magazine Capacity

The vz. 58 Liberty 762 model will automatically ship with one 10 round magazine attached to rifle with magazine block.  Rifles are available with a 5 round magazine.  If a 5 round magazine is preferred, please confirm in the NOTE section of the website order and the rifle will ship with the 5 round magazine.

As found throughout the Czech Small Arms (CSA) line of vz.58 rifles and pistols, the vz.58 Liberty models possess the patented 'push-down' plate on the bolt carrier. The patented ‘push-down’ plate ensures the user will not experience possible misfire problems that can be found with other manufacturer vz.58 type firearms.

The vz.58 Sporter was imported into the United States in compliance with 18 U.S.C. 925(d)(3). CzechPoint adds USA made parts to the vz. 58 Sporter so as to legally reconfigure the firearm with a separate pistol grip and stock. This means that all vz. 58 rifles capable of using double stack magazines possess 5 USA made parts to fully comply with Title 18, U.S.C., Section 922(r).  The vz. 58 rifle is not sold with the bayonet lug as importation of the vz. 58 with a bayonet lug would violate US import law.

This rifle model includes seven USA made parts (only five US made parts are required for 922r compliance so this rifle model possesses two extra US made parts).   The seven USA made parts are: trigger (glass-filled nylon), handguard, grip, polymer follower, polymer floor plate, buttstock, and removable muzzle brake.  If the Czech steel trigger is preferred, please scroll down to the bottom of the page to purchase the steel trigger installed and it will be installed before your rifle ships.  If the Czech steel trigger is installed, the rifle still meets 922r compliance with the remaining six USA made parts.

The Czech Small Arms stock adapter mounts the M4 style stock tube at the bottom area of the vz.58 receiver and has a slight downward angle (as can been seen in the photos to the left). Even though this adapter mounts the M4 style stock slightly higher than the original vz.58 wood impregnated stock, it still provides a comfortable cheek weld for iron sights.

The color of the finish is a semi gloss/matte black coating (cured at 300°F).   The coating has been applied over a phosphate finish to maximize finish durability.   The new production rifle barrels are manufactured by Lothar Walther in Germany and made from a high alloy Chrome Molybdenum steel (4340) and is chrome-lined.   The muzzle brake is removable and the thread pattern is 14x1 right hand (standard vz.58 thread pattern). 

Important Notes:  We are unable to fill requests for a specific sling swivel. The sling swivel will be one of two types:  flat t-shape or circle. 

 

Download Manual

Sa vz. 58 Instruction ManualSa vz. 58 Instruction Manual
 
 

Related products

 
steel trigger installed
ITEM # vz58-4I
OUT OF STOCK

$99.00

Notify me when in stock
LPM optic mount - BLEM
ITEM # vz58-292LR
OUT OF STOCK

$74.00

Notify me when in stock
ISC Riser optic mount
ITEM # vz58-292R
IN STOCK

$67.00

 

© 2013 NOWONET media, s.r.o.